Hannspree LT11-23A1 Uživatelský manuál

NTSCTVTWEN0804MAC-001225User's Manual23" Liquid Crystal DisplayTelevisionLT11-23A12F, No.362, Ruei-Guang Rd., Neihu District, Taipei City 11

9Optimal Viewing Distance250 cm

10 Important Safety InstructionsRead these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus ne

11Protect the power cord from being walked on or pinched, particularly at the plug, convenience receptacles, and the point where they exit from the

12 Personal SafetyTo avoid overloading the power supply, do not plug too many electrical devices into an outlet or extension cable.Dangerous high-volt

13InstallationTo avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust.Do not place the TV on a be

14 OperationMaintenanceThis product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric

15FCC Compliance Statement1This device complies with part 15 of the FCC Rules. Operation is sub-ject to the following two conditions: (1) This devic

16 DOC Compliance Notice1This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the

17Thank you for purchasing this Liquid Crystal Display TV. Your TV is designed to be safe, versatile, and easy to use. Its sturdy design makes it a d

18 Features• 23-inch color TFT LCD TV• Safe, sturdy construction• Built-in dual TV tuner• Audio/video support:– Stereo audio inputs– Composite video i

Table of Contents 11. Warranty and Service ... 42. Preface ...

19Make sure the following components are included in the box. Contact your vendor immediately if anything is missing or damaged.TVUser’s Manual Quick

20 Side Panel Controls Description Function1Power button and LEDTurns the TV on and off. The green LED indicates power on. In PC mode, amber light ind

214 Select channel Changes the channel. Press ∧ to increase the channel number. Press ∨ to decrease the channel number. These buttons are also used t

22 Side Panel Ports Description Function1 AV4Use the AV4 input to connect an external device, such as a VCR or a VCD/DVD player.Audio Input (L, R): wh

23Rear Panel Input and Output PortsDescription Function1 DVI Connects to a PC’s DVI port.2 Line in Connects to a PC’s line/audio out port.3 Line outC

24 4 AV1Use the AV1 input to connect an external device, such as a VCR or a VCD/DVD player with a component output.Audio Input (R, L): white and red a

25Connecting to an Antenna or Cable TV1Connect one end of the VHF/UHF (Antenna) or CATV cable to the ANT Jack (VHF/UHF IN Jack) on the back of the TV

26 Connecting to AV DevicesConnect external devices such as VCD/DVD players or VCRs to the TV using the AV1, AV2, AV3, and AV4 ports on the back or si

27Connecting to a Video Camera Using S-videoThe following illustration shows how to connect the TV to a camcorder using the AV2 S-video port. Actual

28 Connecting to a VCR, VCD, or DVD player using composite videoThe illustration presented here shows how to connect your TV to a VCR, VCD or DVD play

Table of Contents2 11. Adjusting On-Screen Display (OSD) Settings ... 38OSD Setting Menus ...

29Connecting EarphoneYou can use earphone to listen to the TV instead of using the built-in speakers. Connect earphone to the earphone line out port

30 Connecting an Amplifier or SpeakersConnect an external amplifier or speakers to the line out port to provide better sound quality. Refer to the fol

31Connecting to a PCConnect the TV to your PC to use it as the monitor using the DVI port as shown. Connect the DVI port of the TV to the DVI output

32 Connecting the Power Adapter1Connect the power cord to the power adapter as illustrated.2 Plug the power adapter connector into the DC-IN on the re

33Using the Remote ControlFor best result, use the remote control within a distance of 6 meters (20 feet) from the front of the TV’s signal sensor. D

34 Turning the TV On and Off1Press the POWER button on the remote control or on the TV control panel. The power LED indicator on the side of the TV ch

35Adjusting the Volume1Press the VOL + button to increase the volume.2 Press the VOL – button to decrease the volume.3 Press the MUTE button. The wor

36 Using PIP and POPThe TV features Picture-in-Picture (PIP) and Picture-outside-Picture(POP), enabling you to view two sources at the same time. Foll

374 Press the POSITION button on the remote control to move the PIP window to one of the four corners of the screen as shown.5 Press the PIP button t

38 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV's setting. This chapter describes how to change e

Table of Contents 3Miscellaneous Settings ... 67Wide...

39Picture SettingsNotes:• You can control the OSD with either the remote control or the side panel control.• PC picture mode and TV picture mode have

40 Brightness1Press the CHANNEL ∧ or ∨ button to select BRIGHTNESS. The slider bar shows the current setting.2 Press the VOLUME + button to increase t

41Contrast1Press the CHANNEL ∧ or ∨ button to select CONTRAST. The slider bar shows the current setting.2 Press the VOLUME + button to increase the c

42 Backligth (PC mode)1Press the CHANNEL ∧ or ∨ button to select BACKLIGHT. The slider bar shows the current setting.2 Press the VOLUME + button to in

43Hue1Press the CHANNEL ∧ or ∨ button to select HUE. The slider bar shows the current setting.2 Press the VOLUME + button to increase the hue.3 Press

44 Saturation1Press the CHANNEL ∧ or ∨ button to select SATURATION. The slider bar shows the current setting.2 Press the VOLUME + button to increase t

45Sharpness1Press the CHANNEL ∧ or ∨ button to select SHARPNESS. The slider bar shows the current setting.2 Press the VOLUME + button to increase the

46 Black Level1Press the CHANNEL ∧ or ∨ button to select BLACK LEVEL. The slider bar shows the current setting.2 Press the VOLUME + button to increase

47Color Temperature1Press the CHANNEL ∧ or ∨ button to select COLOR TEMP.2 Press the VOLUME + or – button to change the color temperature. The curren

48 Preset1Press the CHANNEL ∧ or ∨ button to select PRESET.2 Press the VOLUME + or – button. “ON” appears in the brackets. All picture settings are re

4 The instructions on this manual are for the model(s) listed on the front cover. Before you start reading, check your product number by looking at th

49Audio SettingsNote:You can control the OSD with either the remote control or the side panel control.Press MENU to enter the OSD Main Menu screen.1P

50 Treble1Press the CHANNEL ∧ or ∨ button to select TREBLE. The slider bar shows the current setting.2 Press the VOLUME + button to increase the trebl

51Bass1Press the CHANNEL ∧ or ∨ button to select BASS. The slider bar shows the current setting.2 Press the VOLUME + button to increase the bass.3 Pr

52 BalanceBBE, TruSurround, and EALA1Press the CHANNEL ∧ or ∨ button to select BALANCE. The slider bar shows the current setting.2 Press the VOLUME +

53Earphone1Press the CHANNEL ∧ or ∨ button to select EARPHONE. The slider bar shows the current setting.2 Press the VOLUME + button to increase the e

54 Preset1Press the CHANNEL ∧ or ∨ button to select PRESET.2 Press the VOLUME + or –button. “ON” appears in the brackets. All audio settings are retur

55TV SettingsNotes:• Operate the OSD with either the remote control or the side panel con-trol.• The TV OSD menu is not available if the input source

56 TV/CATV1Press the CHANNEL ∧ or ∨ button to select TV/CATV. The current setting is shown in brackets.2 Press the VOLUME + button to select CATV in o

57MTS1Press the CHANNEL ∧ or ∨ button to select MTS. The current setting is shown in brackets.2Press the VOLUME + or – button to select from the vari

58 Auto Scan1Press the CHANNEL ∧ or ∨ button to select AUTO SCAN. The current setting is shown in brackets.2 Press the VOLUME + button to enable auto

5This manual is designed to assist users in setting up and using the LCD TV. Information in this document has been carefully checked for accu-racy;

59Channel Add/Erase1Press the CHANNEL ∧ or ∨ button to select CH. ADD/ERASE. The current setting is shown in brackets.2 Press the VOLUME + button to

60 Favorite Channel1Press the CHANNEL ∧ or ∨ button to select FAV.CHANNEL.2 Press the VOLUME + or – button to enter the FAV.CHANNEL menu.3 Press the C

61PC SettingsNotes:• Operate the OSD with either the remote control or the side panel con-trol.• The PC OSD menu is not available if the input source

62 Phase1Press the CHANNEL ∧ or ∨ button to select PHASE. The slider bar shows the current setting.2 Press the VOLUME + button to increase the phase.3

63Clock1Press the CHANNEL ∧ or ∨ button to select CLOCK. The slider bar shows the current setting.2 Press the VOLUME + button to increase the clock.3

64 Auto AdjustmentDOS Mode1Press the CHANNEL ∧ or ∨ button to select AUTO ADJUSTMENT. 2 Press the VOLUME + button to enable auto adjustment. The displ

65Horizontal Position1Press the CHANNEL ∧ or ∨ button to select H POSITION. The slider bar shows the current setting.2 Press the VOLUME + button to m

66 Vertical Position1Press the CHANNEL ∧ or ∨ button to select V POSITION. The slider bar shows the current setting.2 Press the VOLUME + button to mov

67Miscellaneous SettingsNote:Operate the OSD with either the remote control or the side panel control.Press MENU to enter the OSD Main Menu screen.1P

68 WideLanguage1Press the CHANNEL ∧ or ∨ button to select WIDE. The current setting is shown in brackets.2 Press the VOLUME + or – button to select th

6 Electric Power NoticeElectric power may cause personal injury and mechanical damage if it is misused. Although safety has been taken into considerat

69SleeperThe sleep timer turns the TV off automatically after a set time.1Press the CHANNEL ∧ or ∨ button to select SLEEPER. The current setting is s

70 TimeThis setting allows you to set the system time.1Press the CHANNEL ∧ or ∨ button to select TIME.2 Press the VOLUME + button to change the time.3

71Turn the power off before you begin cleaning the TV.For best results, use a clean lens cloth to remove dust and fingerprints from the screen.Do not

72 Situation SolutionNo picture and sound.• Connect the power cord properly.• Press the POWER button on the control panel or remote control.• Press th

73No sound but have image.• Make sure the source device is functioning properly.• Set the volume to a higher level.• Make sure the audio cable

74 LT11-23A1LCD Panel Size 23-inch TFTAspect Ratio 15:9Best Resolution 1280 (horizontal) x 768 (vertical)Maximum Display Area 303 mm (H) x 503 mm (V)T

75PIP Operation ModeThe following table shows which main sources are compatible with PIP and POP sources.Main Source PIP Source POP SourceAV1 (YPbPr

76 Computer Compatibility ChartThe following table shows resolution and frequency values supported by the TV.Resolution Frequency Remarks640 X 400 70

77Aspect Ratio The ratio of width to height of a film, image or display screen.BBE A proprietary audio enhancement technology. BBE compensates for d

MEMO

7Power Supply Safety Notes1. To avoid electric shocks, do not use an extended power cord or an outlet that does not match this product's plug o

MEMO

MEMO

8 Before You Proceed1. Read the Safety Notices and the User’s Manual carefully before turning the product on.2. Keep your User’s Manual in a safe plac